Home
Special Controls
Scoot Control
Features
The Scoot Control is part of our range of input devices. It is to be mounted on the back of the power chair and is a steering device with 2 handles (similar to a compact bicycle steer). The Scoot Control is compatible with either the R-net electronics of Curtiss-Wright or the LiNX electronics of Dynamic Controls.

Special Controls
- Micro Joystick
- Multi Joystick
- All-round Joystick
- Heavy Duty Joystick
- Heavy Duty Kit
- Scoot Control
  - Warning labels
    Please read this manual, the safety instructions and warning texts carefully, in order to reduce the risks associated to the device. Our products are safe under normal and reasonably foreseeable operating conditions.
  - Support, scrapping & recycling
  - Limited liability
    mo-vis accepts no liability for personal injury or damage to property that may arise from the failure of the user or other persons to follow the recommendations, warnings and instructions in this manual.
  - Intended use
  - Features
    The Scoot Control is part of our range of input devices. It is to be mounted on the back of the power chair and is a steering device with 2 handles (similar to a compact bicycle steer). The Scoot Control is compatible with either the R-net electronics of Curtiss-Wright or the LiNX electronics of Dynamic Controls.
  - Operation
  - Parts and accessories
  - Qualifications
  - First time use
  - Cleaning
  - Warnings and limitations
  - Dimensions
- Foot Control

Features

The Scoot Control is part of our range of input devices. It is to be mounted on the back of the power chair and is a steering device with 2 handles (similar to a compact bicycle steer). The Scoot Control is compatible with either the R-net electronics of Curtiss-Wright or the LiNX electronics of Dynamic Controls.

Fully proportional handlebar with 2 rubber handles and 2 configurable thumb throttles at either side
Built in a compact housing, with a 3.5 mm stereo jack to connect an external actuator keypad
- P015-61 Scoot Control R-net: actuator keypad should be compatible with the Curtiss-Wright CJSM2 resistor values
- P015-71 Scoot Control LiNX: actuator keypad should be compatible with LiNX input control systems
Full access to wheelchair functions such as Lights, Horn and Speed settings
Battery (only R-net version) and speed display via LEDs
On-board configuration possible
Compatible with multiple types of power chairs equipped with R-net or LiNX electronics