Troubleshooting

Below is a list of possible problems and their probable cause:


Problem	Possible cause	Remedy
Indicator LED is off or device has no power	No input voltage	Check whether all power cables are still attached Check the fuse between the wheelchair battery and the unit
	Short-circuit: damaged cabling	Check cabling and replace if necessary
	Short-circuit: device consumes more than 3A	Disconnect device and check device
	Incorrect voltage	Check and/or adjust voltage
	Device consumes more than 3A	Disconnect device and check device
	Disconnected cable	Reconnect device
	Damaged cabling	Check cabling and replace if necessary

If the problem persists after intervening, please contact your local dealer or mo-vis to attend to the problem.