Parts and accessories

Twister Basic

The Twister Basiccan be mounted on a plate of metal/plastic with two screws or can be integrated in a tray or other flat surface.

A Twister Basic package consists of the following parts:
Picture Description
1 piece:
  • P005-15/16/17/18/19 Twister Basic (300 mm) - black/red/yellow/blue/green
  • P005-70/71/72/73/74 Twister Basic (1500 mm) - black/red/yellow/blue/green
2 sets of 2 screws with diameter 2.2 mm/0.087 in:
  • Set with length of 6.5 mm/0.27 in for sheet thickness 0.5 mm/0.02 in - 2 mm/0.079 in.
  • Set with length of 9.5 mm/0.37 in for sheet thickness 3 mm/0.19 in - 4.5 mm/0.18 in.
Picture Description
Optionally, there is a M005-29 Twister Basic table mounting set available to mount the Twister Basic in a flat surface above/at/below surface level.

Twister Button

The Twister Basic is mounted in a plastic holder with a diameter of 30 mm/1.18 in to create a Twister Button.

The screw holes in the base plate are reinforced to attach the button firmly to a flat surface. The hole diameter is 2.5 mm/0.098 in and the distance between them is 8 mm/0.315 in.

The Twister Button is delivered with a set of easy-to-install and durable mounting pieces.

The Twister Button package consists of the following parts:

Picture Description
1 P005-00 Twister Basic no screw
M005-23 Twister Basic Mounting Set:
  • 1 Twister Basic Cone
  • 1 Self-adhesive rubber pad 28*2 mm/1.10*0.08 in
  • Set of 3M Dual Lock self-adhesive reclosable fasteners 25*2 mm/0.87*0.08 in
  • 2 sets of 2 screws with diameter 2.2 mm/0.087 in:
    • Set with length of 6.5 mm/0.27 in for sheet thickness 0.5 mm/0.02 in - 2 mm/0.079 in.
    • Set with length of 9.5 mm/0.37 in for sheet thickness 3 mm/0.19 in - 4.5 mm/0.18 in.
This then becomes:
  • P005-85/86/87/88/89 Twister Button (300 mm) - black/red/yellow/blue/green
  • P005-75/76/77/78/79 Twister Button (1500 mm) - black/red/yellow/blue/green

Twister on Bended Tube

The Twister is attached to a mo-vis Q2M bended tube (length 10 cm/3.94 in - diameter 6 mm/0.236 in).

The Twister on Bended Tube can be mounted with the included Q2M clamps to attach to other rods or the power chair.

Picture Description
1 piece:
  • P005-60/61/62/63/64 Twister on Bended Tube (300 mm) - black/red/yellow/blue/green
  • P005-50/51/52/53/54 Twister on Bended Tube (1500 mm) - black/red/yellow/blue/green

Satellite Twister

The Satellite Twister is attached to a mo-vis Q2M bended tube (length 10 cm/3.94 in - diameter 6 mm/0.236 in).

The Satellite Twister is equipped with an insert to mount it on a mo-vis All-round (Light) Joystick.
Note: The Satellite Twister is only available with a short cable (300 mm).
Picture Description
1 piece:
  • P005-40/41/42/43/44 Satellite Twister (300 mm) - black/red/yellow/blue/green

Twister Gooseneck

The Twister Gooseneck consists of a Twister Basic mounted on a flexible of 400 mm/15.75 in.
Note: The Twister Gooseneck is only available with a long cable (1500 mm).

The Twister Gooseneck can easily be mounted with a Q2M 8 mm clamp (e.g. M004-14 Q2M Clamp D8, set = 10 pcs). The base of the Twister Gooseneck also fits perfectly in the M007-01 Q2M Universal Clamp and makes mounting on wheelchair tubes simple and easy (as seen in the picture below).

Picture Description
1 piece:
  • P018-20/21/22/23/24 Twister Gooseneck (1500 mm) - black/red/yellow/blue/green