Parts and accessories
Q2M Universal Clamp (M007-01)
| A universal and adjustable mounting clamp to be fixed on a tube with diameter of 19-26 mm and with a slot for the insertion of a flat (20 - 6 mm) or round (D 10 mm) bar. |
 |
Q2M Clamp D6 (M004-07) and D8 (M004-14)
| The clamps D6 and D8 exist in a thickness of 6 or 8 mm and come in a set of 10 pieces. They can be fixed in any position with an Allen wrench. |
 |
Q2M Rods D6 (M004-74/75/76/77/78) and D8 (M004-83/84/85)
The rods exist in different lengths:
|
 |
Note: The rods and clamps have been designed so that they can be easily connected to each other (see cover). You choose the distances and angles by tightening or loosening the clamps via an Allen wrench. Adjustments can be done any time. If you don't have an Allen key, replace the bolt of the clamp by a mini clamping lever (M5 or M6x25mm).
Note: The D8 and D6 clamps and rods can be combined when you mix a D8 and D6 clamp. Take the upper part of an D8 clamp and the lower parts of a D6 clamp. Assemble and fix both parts with the bolt of t he D6 clamp.
Note: The rods can be bent with a Q2M bending tool (TMHAT00005). Place a rod in the corresponding bending slot (D6, D8 or D10) and bend the rod until the needed angle. The maximum bending angle is around 90°. Bending the rod more than 90° will damage the coating of the anodized aluminum rods. The damage consists of small visible cracks in the surface of the curved part of the aluminum bar.
Q2M Rod Lock (M008-04)
| The rod lock is a rotating swing system that can be locked in any position and fits in the Q2M Universal Clamp. Just slide a rod of D6 in it and fix the rod in the Quick Swing receiver with an Allen key. |
 |
Q2M Clamp D6 Split (M004-26)
| This clamp is specially used with Twisters on Bended Tube. The split makes it possible to slide in the cable of a Twister on Bended Tube. These clamps are available in a set of 10 pieces. |
 |
Q2M Mounting Base D6 (M004-24) and D8 (M004-23)
| The Q2M Mounting Base D6/D8 is a small but firm mounting base to mount small accessories on any flat surface, such as a wheelchair tray. By tightening the 2 provided screws with an Allen wrench, you fix the Q2M Mounting Base on a flat surface. The Mounting Base provides the base to insert a Q2M rod of D6 or D8, on which again you can add Q2M clamps and other Q2M rods to easily build the position that is needed to mount a joystick or other accessories. |
 |
Q2M Quick Swing (M008-03)
|
The Quick Swing is a small swing away mounting system to mount and swing away small accessories (e.g. a switch) into a specific position. The Quick Swing consists of a receiver with rotating system from where the swing away round bar (D6) leaves. The Quick Swing is mounted with the Q2M Universal Clamp. The rod can be bent into the desired shape and angle in function of the customer's needs. |
 |
Multi Swing Mounting Set (M001-70)
|
The Multi Swing Mounting Set is used by default to mount the Multi Swing (motorized mounting arm). The set consists of:
|
 |
Manual Swing Mounting Set (M004-17)
The Multi Swing Mounting Set is used by default to mount the Multi Swing (motorized mounting arm). The set consists of:
|
|
Note: For more information about mounting the Multi Swing or Manual Swing, please refer to the respective user and installation manuals.
Q2M Rod D6-D8 60 mm (M004-90)
| This rod allows you to mount a mo-vis device (e.g. Hand Warmer, Multi Joystick or Micro Joystick) on systems with rods of D8. |
|